Figure 4-113
Note
Video analysis alarm can trigger PTZ preset, tour, and pattern.
Please refer to chapter 4.11.3.1.1 motion detection for detailed information.
4.11.3.2 Intelligence (Optional)
The intelligence function is optional. The intelligence function and the
human face detection can not be valid at the same time!
From main menu->Setting->Event, you can go to the intelligence interface. It includes four
interfaces: Tripwire/intrusion/object/scene.
4.11.3.2.1 Tripwire (Optional)
Note:
The tripwire function is valid once your network camera or your DVR supports this
function.
If your purchased DVR supports the tripwire function, it supports one analog channel.
It is not for the digital channel.
System generates an alarm once there is any object crossing the tripwire in the specified
direction.
From main menu->Setting->Event->Intelligence->Tripwire, the interface is shown as
below. See Figure 4-114.
To Next Page
Loading...
