Dahua HDCVI series - Color

HDCVI Series DVR User’s Manual
106
Figure 4-21
4.4.3 Color
Here you can set hue, brightness, contrast, saturation, gain, white level, color mode and etc. See
Figure 4-22.
Figure 4-22
Please refer to the following sheet for detailed information.
Item
Note
Period
There are two periods in one day. You can set different
sharpness, brightness, and contrast setup for different periods.
Effective Time
Check the box here to enable this function and then set period
time.
Sharpness
The value here is to adjust the edge of the video. The value
ranges from 0 to 100. The larger the value is, the clear the
edge is and vice versa. Please note there is noise if the value
here is too high. The default value is 50 and the recommended
value ranges from 40 to 60.