348
4.10.1.1.5 Security Question
The security question is shown as below. See Figure 4-208.
Here you can change security questions.
Figure 4-208
4.10.1.1.6 ONVIF User
When the camera from the third party is connected with the NVR via the ONVIF user, please use the
verified ONVIF account to connect to the NVR. From main menu->Setting->System->Account->ONVIF
User, you can add/delete/modify user. See Figure 2-51.
Note
The default ONVIF user is admin and the password is what you set in chapter 4.1.2 Device initialization.
The account is read-only.
To Next Page
Loading...
Need help?
General
