Dahua NVR5208-EI User Manual

5.9.10.2 Conguring ANPR
Congure the ANPR alarm rules.
Procedure
Step 1 Select Main Menu > AI > Parameters > ANPR.
Figure 5-175 ANPR
Step 2 Select a channel and then select the Enable checkbox to enable ANPR.
Step 3 (Optional) Enable Sync Vehicle Blocklist/Allowlist to synchronize the blocklist and
allowlist on the NVR to the connected camera.
Step 4 Click General (default), Blocklist or Allowlist tab.
Before enabling the blocklist alarm or allowlist alarm, you need to add the corresponding
plate information.
●
General : The system triggers an alarm when it detects any plate number.
●
Block List : The system triggers an alarm when it detects plate number on the
blocklist.
●
Allow List : The system triggers an alarm when it detects plate number on the
allowlist.
Step 5 Click Setting next to Schedule to congure the arming period.
User's Manual
290

Dahua NVR5208-EI Specifications

General

Brand	Dahua
Model	NVR5208-EI
Category	Network Hardware
Language	English