Dahua NVR5208-EI User Manual

5.9.15 Vehicle Density
You can congure the rules for trac congestion and parking upper limit, , and view the counting
data on the live page.
●
Trac congestion: The system counts the vehicles in the detection area. When the counted
vehicle number and the continuous congestion time exceed the congured values, an alarm is
triggered and the system performs an alarm linkage.
●
Parking upper limit: The system counts the vehicles in the detection area. When the counted
vehicle number exceeds the congured value, an alarm triggered and the system performs an
alarm linkage.
5.9.15.1 Enabling Smart Plan
To use AI by camera, you need to enable the smart plan rst. For details, see "5.9.3 Smart Plan".
5.9.15.2 Conguring Vehicle Density
Procedure
Step 1 Select Main Menu > AI > Parameters > Vehicle Density.
Figure 5-190 Vehicle density
Step 2 Select a channel and then click Add.
Step 3 Select the Enable checkbox and then select a detection type.
User's Manual
308

Dahua NVR5208-EI Specifications

General

Brand	Dahua
Model	NVR5208-EI
Category	Network Hardware
Language	English