Advanced Settings 61
Port status overview Figure 4-84
Table 4-20 Port information
Two link states: Up, Down. Up indicated the port is connected
successfully, and Down indicates the port is not connected.
Display the port rate and the duplex mode.
Two media types: Copper, Fiber. Copper is the RJ-45 port, and Fiber
is the fiber port.
Display the port VLAN. By default, it is VLAN 1.
4.2.2.2 Traffic Overview
You can view the packers, bytes, errors, drops, and filerd information of the ports.
Select Advanced > Monitor > Ports > Traffic Overview. The Port Statistics Overview interface is
displayed. See Figure 4-85.
Port statistics overview Figure 4-85
4.2.2.3 QoS Statistics
You can view the QoS statistics of the ports.
Select Advanced > Monitor > Ports > QoS Statistics. The Queuing Counters interface is
displayed. See Figure 4-86.
To Next Page
Loading...
