Dahua XVR4108C-S2 User Manual

576
Figure 5- 114
Please refer to the following sheet for detailed information.
Parameter
Function
Date format
Here you can select date format from the dropdown list.
Time Format
There are two options: 24-H and 12-H.
Time zone
The time zone of the device.
System time
It is to set system time. It becomes valid after you set.
Sync PC
You can click this button to save the system time as your PC current time.
DST
Here you can set day night save time begin time and end time. You can set
according to the date format or according to the week format.
NTP
Check the box to enable NTP function.
NTP server
Set the time server address.
 Check the NTP box to enable this function.
 Host IP: Input the server IP that installed the NTP server.
 Manual update: Click it, you can sync DVR time with the NTP server
manually.
 Port: System supports TCP transmission only. The port value is 123.
 Interval: It is to set the sync time interval between the DVR and the NTP
server. The value ranges from 0 to 65535 minutes.

Dahua XVR4108C-S2 Specifications

General

Brand	Dahua
Model	XVR4108C-S2
Category	DVR
Language	English