Daihen OTC ALMEGA FD Series User Manual

4.1 Basic Operation
4-2
＋
3
Pressing [ENABLE] and [Up] or [Down] cursor keys enables to change pages of
the interface panel one by one.
>> A page where no item (except 1H) is set is skipped.
POINT
Bear in mind that pressing [ENABLE] and [Up] or [Down] cursor keys when the interface panel
is not open can change the current step.
4
Press the [I/F] key on the teach pendant once again.
>> The top screen of the teach/playback mode is restored.
 Using input signals from external sources
Refer to the time chart in "2.1.2 Display the screen with input signal" in "Chapter 2 Condition settings".

Daihen OTC ALMEGA FD Series Specifications

General

Brand	Daihen
Model	OTC ALMEGA FD Series
Category	Robotics
Language	English