Daikin Altherma 3 H F - Page 194

16 | Technical data
Installer reference guide
194
EPGA11~16DAV3(7) + EAVZ16S18+23DA6V(7)+9W
Daikin Altherma 3 H F
4P556075-1A – 2021.09
English Translation
PCB
NOTES:
1 Colours: BLK: black, RED: red, BLU: blue, WHT: white, GRN: green, YLW:
yellow, PNK: pink, ORG: orange.
2 This wiring diagram applies only to the outdoor unit.
3 When operating, do not short-circuit protective devices S1PH and S1PL
4 Refer to the combination table and the option manual for how to connect
the wiring to X6A, X4A and X41A.
5 Refer to the service manual for instructions on how to set the selector
switches (DS1). The factory setting of all switches is OFF.
(3) Legend
English Translation
Legend Legend
Field supply Field supply
Optional Optional
Part n° Part n°
Description Description
A1P Printed circuit board (main)
A2P Printed circuit board (noise filter)
A3P Printed circuit board (leakage current)
A4P Printed circuit board (ACS)
BS1~BS4 (A1P) Push button switch
C1~C4 (A1P, A2P) Capacitor
DS1 (A1P) Dipswitch
E1H Crankcase heater
E2H Bottom plate heater (option)
E3H~E5H Plate heat exchanger heaters
F1U~F4U (A2P) Fuse
F6U (A1P) Fuse (T 5.0A / 250V)
H1P~H7P (A1P) Light-emitting diode (service monitor is orange)
HAP (A1P) Light-emitting diode (service monitor is green)
K1R (A1P) Magnetic relay (Y1S)
K1R (A4P) Magnetic relay (E3H~E5H)
K2R (A1P) Magnetic relay (Y2S)
K2R (A4P) Magnetic relay (E2H)
K3R (A1P) Magnetic relay (Y3S)
K4R (A1P) Magnetic relay (E1H)