CAT 258 • REBEL APPLIED ROOFTOP 18 www.DaikinApplied.com
®
The MicroTech 4 controller rises above legacy systems
by oering more advanced technology with intelligent
controls that make equipment management easier. Manage
equipement performance with fan airow measuring,
refrigeration and lter system performance analytics and
power consumption in real time.
The unit controller is preprogrammed with the software
necessary to control the unit. Use the unit controller keypad
display to keep schedules, set points and parameters from
being lost, even during a long-term power outage. The unit
controller processes system input data and then determines
and controls output responses. An optional eld- or factory-
mounted BACnet or LonWorks communication module
provides a network interface to the BAS.
Add optional eld congurable I/O modules to add additional
sensors or points that are not standard on rooftop equipment
and report them through the BAS.
• Secure, remote monitoring and control of Daikin rooftop
units with remote servicing capabilities including
advanced data analytics of equipment performance
to lower maintenance and troubleshooting costs while
enhancing the user experience
• Data Logging and Trending to provide simple review of
equipment performance
• Dynamic user dashboards with responsive-design
interface optimized for users’ mobile devices, tablets or
PC’s
Refrigeration Only Controls provides the benets of Daikin
refrigeration system protections but allows for direct third-
party control of major system components. Cooling, Heating,
Damper and Fan Capacities are all controlled directly by a
third-party controller.
To Next Page
Loading...
