Daikin FTXS30HVJU - Page 147

SiUS04-924 Indoor Unit
140 Removal Procedure
4
Remove the 2 pivots.
5
Remove the stepping
motors.
6
Disconnect the
connector to remove the
swing motor.
 When reassembling, set the
swing motors in the correct
order.
Otherwise, they are not
completely installed.
1) Set the swing motor for upper
blade first.
2) Set the swing motor for lower
blade.
4. Removal of the vertical
swing motor.
1
Remove the link cover.
Step
Procedure Points
(R9549)
(R9550)
Swing motor (lower blade)
Swing motor (upper blade)
(R9551)
(R9552)
Link cover