Outdoor Unit SiUS04-924
Removal Procedure 173
2.4 Removal of Fan Motor
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembly work.
Step Procedure Points
1 Cut the clamps at 2
locations.
2
3
Remove the 2 screws at
the bottom first.
Next, remove the 2 top
screws.
Be sure to remove the bottom
screws first. If the top screws are
removed first, the fan motor, the
center of gravity of which is
toward the front, may tilt down or
fall, causing an injury.
4 Remove the fan motor. When reassembling, be sure to
place the wire harness lower.
To Next Page
Loading...
