Daikin FTXS30HVJU - Page 152

Indoor Unit SiUS04-924
Removal Procedure 145
5
Remove the motor
mounting plate.
 Reassembling the fan motor
When reassembling the fan
rotor, provide as much as
0.2inch (5mm) of play
between the side face of the
rotor and the bottom frame.
6
Remove the fan motor.
7
Remove the vibration
absorber.
 When reassembling, engage
the vibration absorber
completely.
Step
Procedure Points
(R9564)
Motor mounting plate
0.2inch
(5mm)
Side face of
bottom frame
Side face of rotor
(R9869)
(R9565)
Fan motor
(R9567)
(R9566)
Vibration absorber.