2-8
※2-5 ASC, Automatic set point change (Option)
This function can change the set temperature automatically over
time (for details, refer to paragraph 1.5.1).
1. Press
or key to select "ON" or "OFF".
ON : Executing the automatic set point change
OFF : Not executing the automatic set point change
2. Select "ON" and press
key to determine, then the previous
setting screen appears (Fig. 1).
1) The temperature can be set up to 9 times.
2) Range of the setting temperature SP: -30.0 ℃ to +30.0 ℃
3) DHU setting: "ON" when a dehumidification operation is
executed, "OFF" when a dehumidification operation is not
executed.
4) Range of the setting humidity SHU: 50% to 95% RH when
DHU setting is "OFF" , "--" appears.
5) Range of operating time: Last, 1 to 999 Hr
Select "Last" for the last operation so that it will be a
continuous operation.
3. ASP Setting Procedure: See the case example below.
No SP℃ DHU SHU (%) Hr
1 15.0 ON 80 48
2 10.0 ON 75 72
3 0.0 OFF -- 240
4 10.0 ON 75 LAST
3-1. Set SP, DHU, SHU or Hr for the first settings in the following
ways.
1) Press
key to change setting to "15.0 ℃ ", the first
SP, and press
key to determine. (Fig. 2)
2) Press
key to move next setting item, SHU, and press
key, then press key to change setting to
"80%", the first SHU, and press
key to determine.
(Fig. 3)
3) Press
key to move next setting item, Hr, and press
key, then press
key to change setting to "48", the
first operating Hr, and press
key to determine. (Fig. 3)
3-2. Similarly, set the second and the third settings for SP, DHU,
SHU or Hr (Figs. 4 and 5).
3-3. To set the fourth setting, select "LAST" for operation time
and press
key (Fig. 6).
3-4. Press
key to move to "START", and press key. The
next screen (Fig.7) will be appeared. (Fig. 6 ⇒ Fig. 7)
3-5. Press
key to start an ASC operation (Fig 7).
Auto Setpoint Change
No SP ℃ DHU SHU(%) Hr
1ON81901
2 22.0 ON 82 902
3 23.0 ON 83 903
15.0
Auto Setpoint Change
No SP ℃ DHU SHU(%) Hr
1ON80
2 22.0 ON 82 902
3 23.0 ON 83 903
15.0
48
First time
Second time
Auto Setpoint Change
No SP ℃ DHU SHU(%) Hr
1ON80
2 10.0 ON 75
30.0OFF--
15.0
48
72
240
Third time
Fourth time
Auto Setpoint Change
No SP ℃ DHU SHU(%) Hr
1ON80
2ON82902
3 23.0 ON 83 903
15.0
48
10.0
Auto Setpoint Change
Auto Setpoint Change
Press
Enter to Start
ESC to Cancel
Auto Setpoint Change
No SP ℃ DHU SHU(%) Hr
1ON81901
2 22.0 ON 82 902
3 23.0 ON 83 903
424.0 ON 84
904
5 25.0 ON 85 905
626.0 ON 86
906
7 27.0 ON 87 907
8 28.0 ON 88 908
929.0 ON 89
:Select Enter :Chg Set
START
21.0
Auto Setpoint Change
No SP ℃ DHU SHU(%) Hr
1ON80
2 10.0 ON 75
3 0.0 OFF --
15.0
48
72
240
4 10.0 ON 75
5
:
START
9
Fig. 1 (Previous setting screen)
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Automatic Setpoint Change
▲▼:Change
ENTER:Confirm
ON
LAST