8-25
Setting item LED panel LCD panel Setting method
–– –– ––
ON, OFF diSPOFF Select "ON" by using
or key, and
press the key to
determine the setting.
ON, OFF P down Select "ON" by using
key and key,
and press the key to
determine the setting.
Current
indication mode
G-SET
operation
Automatic pump
down operation
Dehumidification
ON-A・OFF setting
MODE
M
MODE
M
MODE
M
MODE
M
Note) Refer to the detail of automotic pump down function in the "Section 4.1.3" of Service manual.
CAUTION
1.To apply the dehumidification control, be sure to set "ON-A".
2.ON/OFF of the reheating coil and DE-HUMID LED lit/unlit are not
synchronous.
3.When the dehumidification ON-A・OFF is set to ON, G-Set
operating mode will be skipped.
OFF, ON-A dHu Select "ON-A" by using
key and key,
and press the key to
determine the setting.
08LXE10E-A(22-25)07.2.54:36PMページ8-25