8-24
3.
G-SET operation/Automatic pump down operation mood/Dehumidification ON-A・OFF
setting
The energy consunption reducing operation during G-SET operation, automatic pump down operation
collecting refrigerant to the liquid receiver and dehumidification ON-A・OFF setting are executed.
※ Dehumidfication control is available on A26 and A26A only.
Press the key in current indication mode to go to G-SET operation /
Automatic pump down operation / Dehumidification ON-A・OFF setting.
※ After the automatic pump down is completed, the pump down status is
maintained until the power supply is turned off.
Pressing the key changes the mode between G-SET operation and automatic pump down /
Dehumidification ON-A・OFF setting.
The set point can be set by using key or key.
Note: When the dehumidification ON-A・OFF is set to ON, G-Set operating mode will be skipped.
MODE
M
MODE
M
MODE
M
All indication
light on
(for 3 sec.)
Starting
preparation
(for 18 sec.)
Current
indication
(Operation state)
※
1
G-SET operation /
Automatic pump
down operation /
Dehumidification
ON-A•OFF setting.
MODE
M
08LXE10E-A(22-25)07.2.54:36PMページ8-24