Operation Manual SiBE81-909
26 Humidifying Air Purifier
5.7 Water Tank Preparations
17
Water Tank Preparations
Do not add the following to the water tank.
• Hot water of 40°C or more, aromatic oils,
chemicals, dirty water, water containing
fragrances or solvents, etc. Liquids of the sort
may deform or damage the unit.
• Purified water, alkaline ion water, mineral
water, well water, etc.
These types of water may lead to mildew or
bacterial proliferation.
1
Open the cap on the water tank.
2
Add water to the tank and close the cap.
• Add water somewhere that can be wet if spilled.
•
Before adding the actual water to use in
humidification, add a small amount of water to the
tank, shake to rinse internally and discard the water.
• Hold a full water tank by the handle to carry.
• Do not touch the valve at the center of the cap.
Water may spill from the tank.
Water tank preparations
NOTE
Cap
Do not touch the
valve at the center
of the cap.
Air purifying operation can be operated even
without water in the tank.
Use only tap water.
Close the water tank cap tightly.
Unless tight, water may leak.
To Next Page
Loading...
Need help?
General
