Names and Operation of Each Parts
Operating panel
Water supply lamp
If the water tank empties during humidifying operation, a long •
beep sound repeat 3 times and this lamp lights.
Humidifying operation stops.
(Air purifying operation continues while the humidify lamp is lit.)
To resume humidifying operation, add water to the water tank, •
restore the water tank and press
.
Humidifying fi lter lamp ( )
This lamp lights when it is time to replace the humidifying fi lter. It fl ashes if •
more time passes without changing the fi lter.
Page 37.
After replacing the fi lter, press and hold for about 2 seconds.
(A short beep sound is emitted and the lamps go out.)
Air-purifying fi lter lamp ( )
This lamp lights when it is time to replace the pleated fi lter. It fl ashes if more •
time passes without changing the fi lter.
Page 30.
After replacing the fi lter, press and hold for about 2 seconds.
(A short beep sound is emitted and the lamps go out.)
UNIT lamp
UNIT1→This lamp lights when it is time to clean the plasma ionizer. •
UNIT2→This lamp lights when it is time to clean the streamer unit.•
Page 33, 34.
Brightness adjustment
Use to set lamp brightness for sleeping or as you prefer.
Each time the button is pressed, the brightness of the operating
panel lamps and front indicator lamps change as follows.
Page 13.
<Operating panel lamps>
Only the front indicator lamps go completely off.•
Child proof lock
Press and hold for about 2 seconds to
engage the child proof lock.
(Do the same to cancel the setting.)
When engaged, the child proof lock restricts unit
operation so that it is not inadvertently operated by
children.
ATTENTION
The recyclable deodorizing cartridge can be ●
regenerated even while the child proof lock is
engaged.
If the front panel is removed while the child proof ●
lock is engaged, the unit stops for safety reasons
and the child proof lock is canceled.
To Next Page
Loading...
Need help?
General
