Daktronics BB-2101 - Shot Clock Mounting; Hockey Scoring Modules; Ad Panel Mounting

Mechanical Installation
7
Shot Clock Mounting
Reference Drawings:
Backstop Mounting Suggestions ......................................................................... DWG-91230
Single-sided shot clocks may be mounted to a wall in the same manner as described in
Wall Mounting (p�5).
Multi-sided shot clocks are frequently mounted to vertical backstop supports. Refer to
DWG-91230 in Appendix B for shot clock mounting information.
Note: Daktronics does not supply the hardware or brackets to mount shot clocks to
backstops and is not responsible for the integrity or suitability of mounting systems
manufactured and installed by others.
Hockey Scoring Modules
Reference Drawings:
Hockey Scoreboard Congurations ................................................................. DWG-169166
Hockey scoring modules are small sections that show additional game information, such
as penalty times or shots on goal. Modules can be combined with the main scoreboard
as well as other modules to form many unique arrangements. For more information on
modular scoring congurations, refer to DWG-169166 in Appendix B.
If any modules are to be mounted in a vertical arrangement, the signal cables for
the bottom displays must be installed and connected before the upper sections are
positioned and secured. Refer to Statistics Display & Hockey Module Signal Connection
(p�12).
Ad Panel Mounting
Reference Drawings:
ID or Ad Panel Mounting to Scoreboard ......................................................... DWG-156134
Ad panels may be mounted to a wall in the same manner as a display described in Wall
Mounting (p�5). If an ad panel is to be mounted directly to the top or bottom of a
scoreboard cabinet, refer to DWG-156134 in Appendix B.