15 Piranha2 User’s Manual
Table 4: Camera Link Base Configuration
Base Configuration
One Channel Link Chip + Camera Control +Serial
Communication
Camera Connector Right Angle
Frame Grabber
Channel Link
Signal
1 1 inner shield
14 14 inner shield
2 25 X0-
15 12 X0+
3 24 X1-
16 11 X1+
4 23 X2-
17 10 X2+
5 22 Xclk-
18 9 Xclk+
6 21 X3-
19 8 X3+
7 20 SerTC+
20 7 SerTC-
8 19 SerTFG-
21 6 SerTFG+
9 18 CC1-
22 5 CC1+
10 17 CC2+
23 4 CC2-
11 16 CC3-
24 3 CC3+
12 15 CC4+
25 2 CC4-
13 13 inner shield
26 26 inner shield
Unused pairs should be terminated in 100 ohms at both ends of the cable.
Table 5: DALSA Camera Control Configuration
Signal Configuration Pin
CC1 EXSYNC 9, 22
CC2 PRIN 10, 23
CC3 Spare 11, 24
CC4 Spare 12, 25
See Appendix B for the complete DALSA Camera Link configuration table, and refer to
the DALSA Web site, vfm.dalsa.com, for the official Camera Link documents.
03-32-00493-11 DALSA
To Next Page
Loading...
