78 Piranha2 User’s Manual
Code Command Short
Form
Parameters Description
Parameters:
i = integer
f = float
t = tap selector
s = string
x1 = pixel start
number
x2= pixel end number
[]= optional
parameter
temperature of the camera.
43 verify_voltage
vv
Check the camera voltages and
return OK or fail.
44 warning_enable_disable
wed [i] [i]
Read enable/disable status of
all defined monitoring tasks.
Optionally, the first parameter
selects a monitoring task and
the second parameter
enables/disable the selected
task.
45 write_pixel_coeffs
wpc
Write all current pixel
coefficients to EEROM.
46 write_user_settings
wus
Write all of the user settings to
EEROM except pixel
coefficients which are written
using the wpc command.
03-32-00493-11 DALSA
To Next Page
Loading...
