Danby DPAC10071 - Auto-Timer Instructions; Setting the Auto-On Timer

Auto-Timer
Instructions
The AUTO-TIMER feature
offers a unique selection
of multiple choice,
fully automatic
on/off (start/stop)
programs
between
0 - 23 hrs, 59
mm. under any one
mode
of your Portable
3 Season Home
Comfort
unit.
The programs are
as
follows:
a) Auto -Off: Pre-select a time that will turn
off the
unit (automatically)
at a specified time (between
o
- 23 hrs,
59
mm.). This function
must be
performed daily, as the program is automatically
canc&ed/erased after the program has
ended.
b) Auto-On: Pre-select a time that will turn on the
unit (atomatically) at
a
specified
time (between
o - 23 hrs, 59 mm.). This function must be
performed daily,
as the
program
is automatically
canceled/erased after the program has ended
c)
Auto-On
&
Auto-Off:
Pre-select a time that will
turn the unit ON
/ OFF
(automatically)
at
specified times (between
0
- 23 hrs,
59
mm.).
Unlike
programs a) and
b)
above, this
program
contains
a built-in memory that automatically
stores into
memory the selected times and will
repeat daily,
(same specified times) until the
program is overridden
and/or canceled.
However,
any interruption in electrical power will
automatically
cancel/erase all auto timed
programs.
In the event this should happen,
you
will be required to
re-program your settings.
Setting the AUTO-ON TIMER
Before
setting the AUTO-ON timer,
the TIME OF
DAY
CLOCK must be set/operational.
You must
select all
appropriate settings (i.e. MODE,
FAN
SPEED,
TEMP, HUMIDITY,
SWING etc.) required to
operate
under the AUTO TIMED program
before
initiating the AUTO-ON program.
1) Select the
appropriate MODE under
which
you want the unit to operate
(Auto-Cool-Dry-
Fan).
2) Select the appropriate
FAN SPEED setting,
under which you want the
unit to operate.
(Auto,
Hi, Med, Low) (excluding
Dehumidifying,
as
this
mode
has “1” fan speed setting
only).
3) Select SWING
(oscillation)
by
pressing
the
SWING key
pad (the ‘swing’
symbol will appear
in the display
window).
14