Danby DPAC10071 - Energy-Saving Tips; Installation

Energy-Saving
Tips
You Danby appliance
is designed
to
be
highly
efficient
in energy
savings.
Follow these
recommendations
for greater
efficiency.
1)
Select
a
thermostat
setting that suits
your
comfort
needs and
leave at that
chosen setting.
2)
The air filter is very
efficient in removing
airborne
particles. Keep the
air filter clean
at all times.
3)
Use
drapes, curtains or
shades to
keep direct
sunlight
from penetrating
and
heating
room,
but
do
not
allow
drapes or
curtains to
obstruct the air
flow around
the unit.
::jnstaIIation
______
Installation Accessories
Fig. I
Loction: Use
this portable
air
conditioner
on a
level surface.
Water
may overflow
if
your floor
is not level
and more than
3° inclination
angle.
Description
Quantity
Flexible
exhaust hose with
collars
&
adapters
2/set
stretches
from 17-’/2’ (44.5
cm) up to 55-1/2”
(141
cm)
Adjustable window/patio
door
slider kit 4/set
from 28” (71.1 cm)
up to 80” (203
cm)
Rain
Hood (For slider kit)
1 kit
see
pg
#7 for
assembly instructions
External
Water
Tank Accessories
Fig. Ia
Support
Tray
& Castors
I
pc
External
Tank &
(2) Covers
1
Pc
Drain
Hose
(Not Shown)
1 PC
Air Intake Filter
Basket
(Not
Shown)
1
pc
SPECIAL NOTE:
The exhaust/window
kit must
be
installed at all times
when the
unit
is operating
under
AIR
CONDITIONING
mode.
4)
Start your air conditioner
before
the
outdoor
air
becomes hot and
uncomfortable.
This
avoids
an
initial period
of discomfort
while the unit
is cooling
off the room.
Use
of the automatic
start/stop
programmable
TIMER
feature
can be a major
asset
in this regard if utilized
to the
fullest
extent.
5)
When outdoor
temperatures
are cool enough,
turn the
air conditioner off
and use the
FAN
MODE
on
HIGH,
MED or LOW.
This circulates
indoor air, providing
some
cooling comfort
and
utilizes
less
electricity.
There
should be at
least 11.8”
(30
cm) clearance
between
the unit and any other
objects
or building structure
and
should be installed
on
a
level surface.
The
unit
does
not
have
to be vented
outside
during
Dehumidifying/Fan
mode operation,
it is recommended
however that the
hoses remain
installed (on unit)
during Dehumidification.
Fig. I Installation Accessories
Rain
Hood Inserts (2)
Rain
Hood (1)
Window
Exhaust
Adacter (2)
Adjustable Window/Patio
Door Slider Kit
28”
- 80”
Fig. I a
External
Water
Tank Accessories
Support Tray & Castors
(1) External
Tank
Electric
Shock
Hazard
To avoid the possibility
of personal
injury, disconnect
power to the unit
before
installing
or
servicing.
CAUTION
Ak
To avoid
installationloperation
difficulties,
read
these
instructions thoroughly.
Flexible Exhaust
Hose (2)
17-1/2’ - 55-1/2”
A
NARNING
A:
When
the
patio
door
kit is installed,
it will not
be
possible
to lock the
patio door.
THIS
COULD POSE A
SECURITY
RISK!
Installation
of a “FOOTBOLT”
or
“DROP BAR”
behind the
door is suggested.
(Available through
most local hardware
stores)
-
- A
‘
!I
4