d&b audiotechnik D12 User Manual

Temp. (Temperature Log)
Proportionate temperature ranges.
These display the proportion of "On Time" the D12 has been operated
within the temperature ranges listed.
Channel A (B)
Selecting "Channel A (B)" and pushing the encoder enters the sub-
menu.
Mute
Proportion of the "On Time" the D12 was muted.
ISP
Proportion of the "On Time" an input signal was present at the D12.
GainRed
Proportion of the "On Time" the D12 has been operated with gain
reduction.
Overload
Proportion of the "On Time" the D12 has been operated with too high
input level or output current.
D12 Software manual (Firmware V2.x.x) (5.2EN) Page 25 of 36
Channel A
Channel B
Log Amp. Channel
A
Back
Mute
ISP
. . .

d&b audiotechnik D12 Specifications

General

Channels	2
Total Harmonic Distortion (THD)	< 0.05%
Input Sensitivity	+6 dBu
Amplifier Technology	Class D
Damping Factor	> 200
Input Connectors	XLR
Frequency Response	20 Hz - 20 kHz
Input Impedance	10 kOhms
Mains Voltage	100-240V, 50/60Hz
Cooling	Temperature controlled fan
Output Connectors	NL4