D&R CinemIX - Page 3

3.5 Phase switch
3.6 Insert
3.7 Sel switch
3.8 SOLO
3.9 Mute function
3.10 Fader
3.11 CHAN/MIX status section
3.12 MIX path
3.13 LCRS pan-pot
3.14 CHAN/MIX path in/outputs
4.0 Dual Stereo return module
4.1 Input ssection
4.2 Equalizer sections
4.3 Aux send 1-4 section
4.4 Status section
4.5 Aux 5-10 section
4.6 Equalizer section
4.7 Balance pot
4.8 Status section B path
4.9 In/outputs
5.0 Patchbay - description
5.1 Patchbay points
6.0 Instructions for operation
6.1 The Tracking session
6.2 The Playback session
6.3 The Overdub session
6.4 The REmix session
6.5 MIDI or Virtual session
6.6 Surround mixing
7.0 Installation - electrical
7.1 Local Electrical Voltage
7.2 Electrical Wiring
8.0 Installation - audio
8.1 Interface with Power Amps
8.2 The Initial Hook-up
8.3 Shields & Grounds of Equipment
Cinemix manual page: 3