Zpen User’s Guide
42
¾ To modify the Receiver position:
1 In the menu bar, select Tools Ä Set Receiver Position. The
Set Receiver Position window opens (see page 40).
2 Select the marker corresponding to the location on the page
where you want to position the Receiver.
3 Click OK to save your settings.
Setting the Clock
The Zpen provides a timestamp feature that enables you to
readily see when you saved a file that you wrote using the Zpen.
The Receiver contains a clock, which is used to determine the
timestamp for a Zpen file. You should set the clock on the
Receiver for a file’s timestamp to be accurate.
¾ To set the clock on the Receiver:
1 Access the Zpen Properties window by selecting Start Ä
Programs Ä Digital Pen & USB Flash Drive Ä Device
Properties.
To Next Page
Loading...
