Danfoss AK-CC 750 series User Manual

46 RS8GM222 © Danfoss 10-2014 AK-CC 750 - 080Z0130 & 080Z0139
System setup
1. Go to Conguration menu
2. Select System setup
3. Set system settings
Conguration - continued
3-
Controller name
In the rst eld you enter a name for what the
controller will be controlling.
Main frequency
Set frequency.
Alarm language
Select the language that alarm text should be
displayed in here.
Alarm text can be in a dierent language to
the operating language.
Clock
When the time is set the PC’s time can be
transferred to the controller.
When the controller is connected to a net-
work, date and time will automatically be set
by the system unit in the network. This also
applies to change-over Daylight saving.
General
All system settings can be changed by pressing
in the blue eld with the setting and then indi-
cating the value of the required setting.

Danfoss AK-CC 750 series Specifications

General

Brand	Danfoss
Model	AK-CC 750 series
Category	Controller
Language	English