AK-CC 750 - 080Z0130 & 080Z0139 RS8GM222 © Danfoss 10-2014 67
Manual defrost
1. Go to Conguration menu
2. Select defrost
3. Start defrost
If you want to carry out manual defrost, proceed as follows.
5. Log survey
6. Start the log collection
Move to the rst of the three displays and start the log collec-
tion
Here is the survey of all the parameters that are collected in the
log.
If a parameter has to be removed from the log collection, you
must select the parameter and then press Remove.
If a parameter has to be added it is done in accordance with
the earlier display
A LOG CAN ONLY BE DISPLAYED IF:
• THE CLOCK HAS BEEN SET AND
• THE CONFIGURATION IS LOCKED
Activate