User manual Installation, Operation and Maintenance APP Pumps (APP 16-22)
10
180R9265 / IOM APP Pumps - v01 / 01.2013
See below examples of where to/not to attach
the lifting slings on the pump unit:
Correct lifting with 2 separate slings:
When lifting the pump unit, one sling must be
attached to the electric motor and one sling
around the pump.
Only some motors and pumps have specic
lifting eyes.
Do not use connections/nozzles for lifting!
Do not use only one sling!
Make sure that the unit/load is balanced before
attempting to lift, as the centre of the mass is
dierent from pump to pump and pump unit to
pump unit.
How to mount the pump and the electric motor
correctly together, see Data sheet in appendix 1
or APP pump instruction in appendix 2.
Wrong lifting:
Incorrect lifting can result in personally injury
and/or damage to the pump unit.
4.5 Return to supplier
Please see maintenance chapter 7.
4.6 Storage
Each pump is tested before shipment and
therefore holds water, so for storage tempera-
ture and frost protection see Data sheet in
appendix 1 or APP pump instruction in appendix
2.
The pumps are NOT delivered frost protected
from the factory.
To Next Page
Loading...
Need help?
General
