38
180R9265 / IOM APP 16-22 Appendices - v02 / 01.2013
Parts list APP 0.6-38 / APM 0.8-2.9 / APPW 5.1-10.2
17. APP 22
180B4206 – Seal set
(APP 22)
180B4205 – Cylinder barrel set
(APP 22)
180B4204 – Valve plate set
(APP 22)
180B4201 – Retainer set
(APP 22)
180B4200 – Piston set
(APP 22)
180B4202 – Swash plate
(APP 22 / 1200 rpm)
180B4218 – Swash plate
(APP 22 / 1500 rpm)
180B4203 – Flushing valve set
(APP 22)
Pos. Qnt. Designation Material
11Housing Duplex / PEEK
2 2 Pin (Ø6 x 10) AISI 316 x
2 2 Pin (Ø6 x 10) AISI 316 xxx
32Bleeding plug Super Duplex x
4 2 O-ring, (Ø11.0 x 2.0 ) NBR x
5 12 Screw (M8 x 30) AISI 316 x
9 1 O-ring, (Ø182 x 4.0 ) NBR x xx
10 2 O-ring, (Ø9.19 x 2.62) NBR x
11 1 End ange Duplex
12 1 Lifting eye AISI 316 xx
31 1 Swash plate Super Duplex / PEEK x
31 1 Swash plate Super Duplex / PEEK x
34 2 Pin (Ø10.5 x 20) Duplex x xx
61 1 Cylinder barrel Super Duplex / Duplex / PEEK x
62 7 Spring Duplex x
63 1 Spring guide PP x
64 1 Retainer ball Super Duplex x
65 1 Retainer plate Super Duplex x
66 7 Piston Super Duplex / PEEK x
67 1 Key (12 x 8 x 70) AISI 316
81 3 Pin (Ø6,4 x 40) Super Duplex x
91 1 Port plate Super Duplex / PEEK x
92 1 Valve plate Super Duplex x
93 7 Back-up ring PTFE x x
94 7 O-ring, (Ø30.2 x 3.0) NBR x x
121 1 Port ange Duplex / PEEK
122 1 O-ring, (Ø68 x 2.0) NBR x
123 1 O-ring, (Ø182 x 4.0) NBR x
124 1 Shaft seal Hastelloy/NBR x
125 1 Cover for shaft seal Super Duplex
126 2 Pin (Ø10.5 x 20) Duplex x x
127 4 Screw (M6 x 16.0) AISI 316 x
128 10 Screw (M8 x 75) AISI 316 x
129 1 Lifting eye AISI 316
142 1 Stop for shaft seal PP x
144 4 Tail stock screw (M12 X 60) AISI 316
145 4 Check nut M12 AISI 316
151 1 O-ring, (Ø35 x 3) FPM 75 x x
152 1 Valve cone Super Duplex x
153 1 Spring (Ø1.9 x Ø25.0 x 33.7) Duplex x
154 1 Plug/guide Super Duplex x
155 1 O-ring, (Ø47.22 x 3.53) NBR x x
Instruction xxxxxxxx
Note:
The parts listed are not sold
separately, only in various kits
Exploded view, see next page.
To Next Page
Loading...
