Danfoss D1 Series - Page 53

2. Install the plug G255 and torque to the required specification.
D900
D900
D920
D901
D902
D910
G255
G254
Wrench size and torque
Item Wrench size Torque
G254 6mm hex 9.9-12.1 Nm
G255 6mm hex 30.6-37.4 Nm
D900 6mm hex 30.6-37.4 Nm
D901 22mm hex 30.6-37.4 Nm
Service Manual
D1 High Power Open Circuit Pumps Size 65/130/145/193/260
Minor repairs
©
Danfoss | July 2019 L1527453 | AX00000292en-CN0201 | 53