Danfoss FC 51 Series User Manual

5 Parameter Lists
50
5.1.1 Conversion Index 54
5.1.2 Change during operation 54
5.1.3 2-Set-up 54
5.1.4 Type 54
5.1.5 0-** Operation/Display 55
5.1.6 1-** Load/Motor 56
5.1.7 2-** Brakes 57
5.1.8 3-** Reference/Ramps 57
5.1.9 4-** Limits/Warnings 58
5.1.10 5-** Digital In/Out 58
5.1.11 6-** Analog In/Out 59
5.1.12 7-** Controllers 59
5.1.13 8-** Comm. and Options 60
5.1.14 13-** Smart Logic 60
5.1.15 14-** Special Functions 61
5.1.16 15-** Drive Information 61
5.1.17 16-** Data Readouts 62
6 Troubleshooting
63
6.1.1 Alarm, Warning and Extended Status Word 65
Index
69
Contents
VLT
®
Micro Drive FC 51 Programming Guide
2 MG02C602 - VLT
®
is a registered Danfoss trademark

Danfoss FC 51 Series Specifications

General

Enclosure	IP20
Fieldbus communication	CANopen
Input Voltage	200-240V AC, 380-480V AC
Output Frequency	0-400 Hz
Protection Features	Overcurrent, overvoltage, undervoltage, short circuit, overtemperature
Communication Interfaces	RS-485
Power range	0.25 kW to 7.5 kW