Danfoss FC 51 Series User Manual

2 Introduction
2.1.1 FC Identification
The nameplate sticker is located on the top of each
frequency converter and shows the ratings, serial number,
warnings catalog number, and other relevant data for each
unit. See Table 2.1 for details, how to read the type code
string.
Illustration 2.1 This Example Shows the Nameplate Sticker
Introduction
VLT
®
Micro Drive FC 51 Programming Guide
MG02C602 - VLT
®
is a registered Danfoss trademark 5
2 2

Danfoss FC 51 Series Specifications

General

Enclosure	IP20
Fieldbus communication	CANopen
Input Voltage	200-240V AC, 380-480V AC
Output Frequency	0-400 Hz
Protection Features	Overcurrent, overvoltage, undervoltage, short circuit, overtemperature
Communication Interfaces	RS-485
Power range	0.25 kW to 7.5 kW