NOTICE
When the PV configuration, installed PV power and PV
array area of follower inverters in the network differ
from that of the master, do not replicate. Set up the
follower inverters individually.
Illustration 3.17 Step 7 of 8: Replication
Step 8 of 8: Inverter start-up
The wizard displays an overview of the setup configuration.
Click on [Finish] to start up the inverter. Start-up will commence when solar irradiation is sufficient.
The start-up sequence, including self-test, takes a few minutes.
Initial Setup and Start
L00410568-02_02 / Rev. date: 2013-12-10 25
3
To Next Page
Loading...
Need help?
General