During operation:
•
The safety option monitors any pulse changes at its safe inputs.
•
The safety option executes safety functions according to the configuration.
5.6 Commissioning Set-up Examples
130BC327.10
FC302 1
FC302 1
FC302 1 FC302 2 FC302 3
FC302 2
MCT10
RS-485
MCB15x
MCB15x
MCB15x
MCB15x
MCB15x
MCB15x
MCT10
1 2 3
2
1
1
RS-485
USB
LCP
A
B C
A Commission is done between MCT 10 Set-up Software and the frequency converter.
B
Safety parameters are copied from one frequency converter to another using LCP Copy.
C Safety options configured in a network using MCT 10 Set-up Software.
Illustration 5.1 Commissioning Set-up Examples
Commissioning Operating Instructions
MG37F102 Danfoss A/S © 10/2014 All rights reserved. 19
5 5
To Next Page
Loading...
Need help?
General
