Danfoss Metasys N2 Service Guide

3.7 Product Options
Product options
Option location
Main enclosure Extended options cabinet
RFI lter
1)
X
Mains fuses only
2)
X
Contactor + fuses
1)
X
Disconnect + fuses
1)
X
Circuit breaker + fuses
1)
X
Contactor + disconnect + fuses
1)
X
Regeneration terminals
3)
X
Load sharing terminals X
Brake chopper
4)
X
Anti-condensation heater X
Multiwire kit X
Table 3.11 Options available for D1h–D8h Drives
1) Contactor, disconnect, or circuit breaker options always include fuses. These options are not applicable to parallel drive systems.
2) AC fuses are the default conguration for VLT
®
Parallel Drive Modules.
3) Regeneration terminals are standard in J8/J9 drives.
4) Brake option is not available in J8/J9 drives.
Product options
Option location
Main enclosure
RFI lter X
AC fuses X
Disconnect + fuses
1)
X
Regeneration terminals X
Load sharing terminals X
Brake X
Table 3.12 Options available for E1h–E4h Drives
1) The disconnect option always includes fuses. Disconnect is not available in E3/E4 units.
Product Overview Service Guide
MG94A502 Danfoss A/S © 02/2019 All rights reserved. 29
3 3

Danfoss Metasys N2 Specifications

General

Brand	Danfoss
Model	Metasys N2
Category	DC Drives
Language	English