Danfoss VLT AQUA Drive - Page 157

Lcp 102 49
Leakage Current 6
Leds 49
Limits / Warnings 105
Live Zero Timeout Function, 6-01 81
Live Zero Timeout Time, 6-00 81
Load/motor 102
Low Power Detection, 22-21 88
Low Speed Detection, 22-22 88
M
Main Menu 61
Main Menu Mode 52
Main Menu Mode 66
Main Reactance 73
Mains Connection For A2 And A3 27
Mains Connection For B1, B2 And B3 30
Mains Connection For C1 And C2 31
Mains Supply 137, 142
Mains Supply (l1, L2, L3) 144
Maximum Boost Time 91
Maximum Reference, 3-03 73
Mct 10 60
Mechanical Dimensions 20, 22
Minimum Run Time, 22-40 90
Minimum Sleep Time, 22-41 90
Motor Current 72
Motor Frequency, 1-23 72
Motor Name Plate 42
Motor Nominal Speed, 1-25 72
Motor Output 144
Motor Power [kw], 1-20 72
Motor Protection 144
Motor Speed High Limit [rpm], 4-13 75
Motor Speed Low Limit Rpm, 4-11 75
Motor Voltage 149
Motor Voltage 72
Motor Voltage, 1-22 72
N
Name Plate Data 42
Name Plate Data. 42
Nlcp 54
No-flow Delay, 22-24 88
No-flow Function, 22-23 88
Non Ul Compliance 23
O
Occurrence, 23-04 97
Off Action, 23-03 96
On Action, 23-01 94
Operation/display 100
Output Performance (u, V, W) 144
P
Parameter Options 99
Parameter Selection 66
Parameter Set-up 61
Pc Software Tools 60
Peak Voltage On Motor 149
Pid Integral Time, 20-94 87
Pid Normal/inverse Control, 20-81 87
Pid Proportional Gain, 20-93 87
Pid Start Speed [rpm], 20-82 87
Pipe Fill Rate, 29-04 98
VLT
®
AQUA Drive
Operating Instructions
Index
MG.20.M4.02 - VLT
®
is a registered Danfoss trademark 157