Power Connections 3-42
AC line input connections 3-58
Fuses 3-59
Motor Insulation 3-62
Motor Bearing Currents 3-63
Control cable routing 3-64
Electrical Installation, Control Terminals 3-66
Connection Examples 3-67
Start/Stop 3-67
Pulse Start/Stop 3-67
Electrical Installation - continued 3-69
Electrical Installation, Control Cables 3-69
Switches S201, S202, and S801 3-72
Final Set-up and Test 3-73
Additional Connections 3-75
Mechanical Brake Control 3-75
Motor Thermal Protection 3-76
4 How to operate the adjustable frequency drive
4-1
Ways of Operation 4-1
How to operate the Graphical LCP (GLCP) 4-1
How to operate the numeric LCP (NLCP) 4-7
Tips and tricks 4-11
5 How to program the adjustable frequency drive
5-1
How to program 5-1
Q1 My Personal Menu 5-3
Q2 Quick Set-up 5-3
Q5 Changes Made
5-6
Q6 Loggings 5-6
Commonly Used Parameters - Explanations 5-8
Main Menu 5-8
Parameter Options 5-49
Default settings 5-49
0-** Operation/Display 5-50
1-** Load/Motor 5-51
2-** Brakes 5-51
3-** Reference / Ramps 5-52
4-** Limits / Warnings 5-53
Contents VLT AQUA High Power Instruction Manual
MG.20.P3.22 - VLT
®
is a registered Danfoss trademark
To Next Page
Loading...
