Torque requirements:
1. M5 screws/ nuts torque to 20 in-lbs (2.3 N-M)
2. M6 screws/ nuts torque to 35 in-lbs (3.9 N-M)
3. M10 nuts torque to 170 in-lbs (20 N-M)
4. T25 Torx screws torque to 20 in-lbs (2.3 N-M)
NOTE!
Please see the instructions
175R5922
for further information
3 How to Install VLT AQUA High Power Instruction Manual
3-34
MG.20.P3.22 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
