Danfoss vlt aqua - Step 3. Activate the Automatic Motor Adaptation (AMA); Step 4. Set speed limit and ramp time

IEC Emergency Stop with Pilz Safety Relay
Includes a redundant 4-wire emergency-stop pushbutton mounted on the front of the enclosure and a Pilz relay that monitors it in conjunction with the
drive’s safe-stop circuit and the line power contactor located in the options cabinet.
3 How to Install VLT AQUA High Power Instruction Manual
3-40 MG.20.P3.22 - VLT
®
is a registered Danfoss trademark
3