15-41 Power Section
Range: Function:
0 * [0 - 0 ] View the FC type. The read-out is identical to the
FC 300 Series power field of the type code
definition, characters 7-10.
15-42 Voltage
Range: Function:
0 * [0 - 0 ] View the FC type. The read-out is identical to the
FC 300 Series power field of the type code
definition, characters 11-12.
15-43 Software Version
Range: Function:
0 * [0 - 0 ] View the combined SW version (or ‘package
version’) consisting of power SW and control SW.
15-44 Ordered Typecode String
Range: Function:
0 * [0 - 0 ] View the type code string used for re-ordering the
frequency converter in its original configuration.
15-45 Actual Typecode String
Range: Function:
0 * [0 - 0 ] View the actual type code string.
15-46 Frequency Converter Ordering No
Range: Function:
0 * [0 - 0 ] View the 8-digit ordering number used for re-
ordering the frequency converter in its original
configuration.
15-47 Power Card Ordering No
Range: Function:
0 * [0 - 0 ] View the power card ordering number.
15-48 LCP Id No
Range: Function:
0 * [0 - 0 ] View the LCP ID number.
15-49 SW ID Control Card
Range: Function:
0 * [0 - 0 ] View the control card software version number.
15-50 SW ID Power Card
Range: Function:
0 * [0 - 0 ] View the power card software version number.
15-51 Frequency Converter Serial Number
Range: Function:
0 * [0 - 0 ] View the frequency converter serial number.
15-53 Power Card Serial Number
Range: Function:
0 * [0 - 0 ] View the power card serial number.
15-58 Smart Setup Filename
Range: Function:
Size related* [0 - 0 ] Shows the currently used smart
application setup filename.
15-59 CSIV Filename
Range: Function:
Size related* [0 - 0 ] Shows the currently used CSIV (Costumer
Specific Initial Values) filename.
3.16.6 15-6* Option Ident.
This read-only parameter group contains information about
the hardware and software configuration of the options
installed in slots A, B, C0 and C1.
15-60 Option Mounted
Array [8]
Range: Function:
0 * [0 - 0 ] View the installed option type.
15-61 Option SW Version
Array [8]
Range: Function:
0 * [0 - 0 ] View the installed option software version.
15-62 Option Ordering No
Array [8]
Range: Function:
0 * [0 - 0 ] Shows the ordering number for the installed
options.
15-63 Option Serial No
Array [8]
Range: Function:
0 * [0 - 0 ] View the installed option serial number.
15-92 Defined Parameters
Array [1000]
Range: Function:
0 * [0 - 9999 ] View a list of all defined parameters in the
frequency converter. The list ends with 0.
Parameter Descriptions
VLT
®
AutomationDrive Programmming Guide
MG33ME02 - VLT
®
is a registered Danfoss trademark 141
3
3
To Next Page
Loading...
