15-93 Modified Parameters
Array [1000]
Range: Function:
0 * [0 - 9999 ] View a list of the parameters that have been
changed from their default setting. The list
ends with 0. Changes may not be visible until
up to 30 s after implementation.
15-99 Parameter Metadata
Array [30]
Range: Function:
0 * [0 - 9999 ] This parameter contains data used by the MCT
10 Set-up Software.
Parameter Descriptions
VLT
®
AutomationDrive Programmming Guide
142 MG33ME02 - VLT
®
is a registered Danfoss trademark
3
3
To Next Page
Loading...
