Danfoss VLT AutomationDrive FC 302 Installation Guide

• Safety functions: Safe Torque Off (STO) in accordance with EN IEC 61800-5-2
• PROFIsafe version 2.4 communication
• Two dual-channel digital inputs:
- Safety function activation
- Monitoring
- Configurable reset behavior (automatic or manual reset).
• LED status indication
• Supply voltage
- Internally supplied by the drive
- 24 V DC output for safety sensors available.
• Safe output S37
1.5.3 Items Supplied
• VLT® Safety Option MCB 152
• VLT® Safety Option MCB 152 Installation Guide
1.5.4 Compatible Drive Series
The VLT® Safety Option MCB 152 is a standard B option compatible with:
• VLT® AutomationDrive FC 302
• VLT® Decentral Drive FCD 302
1.5.5 Front View
MCB 152
Safe Option
PROFIsafe
SW. ver. xx.xx
Option B
130B9860
LED:
1
1 2 3 4 5 6 7 8 9 10 11 12
2 3 4
Y33/
DI1 A GND GND GND GND DI1 B NC NC 24 V S 37 DI2 A DI2 B
e30be100.11
Illustration 2: VLT® Safety Option MCB 152 Front View
1.5.6 Hardware and Software Requirements
The following software versions are required as a minimum when using VLT® Safety Option MCB 152:
• LCP software version 7.0
• VLT® AutomationDrive FC 302 firmware version 7.26
• VLT® Decentral Drive FCD 302 firmware version 8.23
• PROFINET software version 3.0
• VLT® Motion Control Tool MCT 10 software version 3.23. A license key is required to use the full set of features.
Introduction
Installation Guide | VLT®Safety Option MCB 152
AN327351953089en-000101 / 130R0578
8 | Danfoss A/S © 2020.02

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English