Danfoss VLT HVAC Drive FC 102 Programming Guide

Option
Name
Description
[151]
ATEX ETR cur. alarm
[152]
ATEX ETR freq. alarm
[153]
ATEX ETR cur. warning
[154]
ATEX ETR freq. warning
[173]
10Wh counter pulse
[178]
RS Flipflops 8
[179]
RS flipflops 9
[180]
Clock fault
[181]
Prev. Maintenance
[188]
AHF Capacitor Connect
[189]
External Fan Control
[190]
Safe Function active
[191]
Safe Opt. Reset req.
[192]
RS Flipflop 0
[193]
RS Flipflop 1
[194]
RS Flipflop 2
[195]
RS Flipflop 3
[196]
RS Flipflop 4
[197]
RS Flipflop 5
[198]
RS Flipflop 6
[199]
RS Flipflop 7
[221]
IGBT-cooling
[222]
Homing OK
[223]
On target
[224]
Position limit
[225]
Position error
[226]
Touch on target
[227]
Touch activated
[228]
Touch sensor found
[229]
Vir. master on ref.
[231]
In Power Lim. Mot.
[232]
In Power Lim. Gen.
AU275636650261en-000101 / 130R0334208 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT HVAC Drive FC 102 Specifications

General

Enclosure	IP20, IP21, IP55
Ambient Temperature Range	-10°C to +40°C
Storage Temperature Range	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Communication Protocols	Modbus RTU, BACnet, Profibus
Certifications	CE, UL, cUL
Control Principle	PWM
Cooling Method	Forced air cooling
Input Voltage	200-240V, 380-480V, 525-600V
Control Modes	sensorless vector control, closed loop vector control