Danfoss VLT HVAC Drive FC 102 Programming Guide

Parameter 9-94 Changed Parameters (5)
Table 577: Parameter 9-94 Changed Parameters (5)
9-94 Changed Parameters (5)
Default value: 0
Parameter type: Range, 0 - 9999
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: False
This parameters shows a list of all the drive parameters deviating from default setting.
Parameter 9-99 PROFIBUS Revision Counter
Table 578: Parameter 9-99 PROFIBUS Revision Counter
9-99 PROFIBUS Revision Counter
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation:
Readout of revision count.
5.11 Parameter Group 10-** CAN Fieldbus
5.11.1 10-0* Common Settings
Parameter 10-00 CAN Protocol
Table 579: Parameter 10-00 CAN Protocol
10-00 CAN Protocol
Default value: Size related
Parameter type: Option
Setup: 2 setups
Conversion index: –
Data type: Uint8
Change during operation: False
The options available depend on the installed option card.
Option
Name
Description
[0]
CANopen
[1]
DeviceNet
Parameter 10-01 Baud Rate Select
Table 580: Parameter 10-01 Baud Rate Select
10-01 Baud Rate Select
Default value: Size related
Parameter type: Option
Setup: 2 setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select the fieldbus transmission speed. The selection must correspond to the transmission speed of the master and of the other
fieldbus nodes.
Option
Name
Description
[16]
10 Kbps
[17]
20 Kbps
[18]
50 Kbps
[19]
100 Kbps
AU275636650261en-000101 / 130R0334 | 327Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT HVAC Drive FC 102 Specifications

General

Enclosure	IP20, IP21, IP55
Ambient Temperature Range	-10°C to +40°C
Storage Temperature Range	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Communication Protocols	Modbus RTU, BACnet, Profibus
Certifications	CE, UL, cUL
Control Principle	PWM
Cooling Method	Forced air cooling
Input Voltage	200-240V, 380-480V, 525-600V
Control Modes	sensorless vector control, closed loop vector control