Danfoss VLT HVAC Drive FC 102 Programming Guide

View the power card code number.
Parameter 15-48 LCP ID No
Table 793: Parameter 15-48 LCP ID No
15-48 LCP ID No
Default value: 0
Parameter type: Range, 0 - 20
Setup: All setups
Conversion index: 0
Data type: VisStr[20]
Change during operation: False
View the LCP ID number.
Parameter 15-49 SW ID Control Card
Table 794: Parameter 15-49 SW ID Control Card
15-49 SW ID Control Card
Default value: 0
Parameter type: Range, 0 - 20
Setup: All setups
Conversion index: 0
Data type: VisStr[20]
Change during operation: False
View the control card software version number.
Parameter 15-50 SW ID Power Card
Table 795: Parameter 15-50 SW ID Power Card
15-50 SW ID Power Card
Default value: 0
Parameter type: Range, 0 - 20
Setup: All setups
Conversion index: 0
Data type: VisStr[20]
Change during operation: False
View the power card software version number.
Parameter 15-51 Frequency Converter Serial Number
Table 796: Parameter 15-51 Frequency Converter Serial Number
15-51 Frequency Converter Serial Number
Default value: 0
Parameter type: Range, 0 - 10
Setup: All setups
Conversion index: 0
Data type: VisStr[10]
Change during operation: False
View the drive serial number.
Parameter 15-53 Power Card Serial Number
Table 797: Parameter 15-53 Power Card Serial Number
15-53 Power Card Serial Number
Default value: 0
Parameter type: Range, 0 - 19
Setup: All setups
Conversion index: 0
Data type: VisStr[19]
Change during operation: False
View the power card serial number.
Parameter 15-54 Config File Name
Table 798: Parameter 15-54 Config File Name
15-54 Config File Name
Default value: Size related
Parameter type: Range, 0 - 16, Array [8]
Setup: All setups
Conversion index: 0
Data type: VisStr[16]
Change during operation: False
Shows the special configuration file names.
AU275636650261en-000101 / 130R0334 | 491Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT HVAC Drive FC 102 Specifications

General

Enclosure	IP20, IP21, IP55
Ambient Temperature Range	-10°C to +40°C
Storage Temperature Range	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Communication Protocols	Modbus RTU, BACnet, Profibus
Certifications	CE, UL, cUL
Control Principle	PWM
Cooling Method	Forced air cooling
Input Voltage	200-240V, 380-480V, 525-600V
Control Modes	sensorless vector control, closed loop vector control