Danfoss VLT HVAC Drive FC 102 Programming Guide

•
•
•
Option
Name
Description
[41]
Set digital out D high
[42]
Set digital out E high
[43]
Set digital out F high
[60]
Reset counter A
[61]
Reset counter B
[62]
Counter A (up)
[63]
Counter A (down)
[64]
Counter B (up)
[65]
Counter B (down)
Parameter 23-04 Occurrence
Table 1025: Parameter 23-04 Occurrence
23-04 Occurrence
Default value: [0] All days
Parameter type: Option, Array [10]
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: True
Select which days the timed action applies to. Specify working/nonworking days in:
Parameter 0-81 Working Days.
Parameter 0-82 Additional Working Days.
Parameter 0-83 Additional Non-Working Days.
Option
Name
Description
[0]*
All days
[1]
Working days
[2]
Non-working days
[3]
Monday
[4]
Tuesday
[5]
Wednesday
[6]
Thursday
[7]
Friday
[8]
Saturday
[9]
Sunday
[10]
Day 1 of month
[11]
Day 2 of month
[12]
Day 3 of month
[13]
Day 4 of month
AU275636650261en-000101 / 130R0334 | 555Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT HVAC Drive FC 102 Specifications

General

Enclosure	IP20, IP21, IP55
Ambient Temperature Range	-10°C to +40°C
Storage Temperature Range	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Communication Protocols	Modbus RTU, BACnet, Profibus
Certifications	CE, UL, cUL
Control Principle	PWM
Cooling Method	Forced air cooling
Input Voltage	200-240V, 380-480V, 525-600V
Control Modes	sensorless vector control, closed loop vector control