Danfoss VLT Midi Drive FC 280 Programming Guide

4.15 Parameters: 15-** Drive Information
15-00 Operating hours
Range: Function:
0 h* [0 - 0x7f. h] View how many hours the frequency
converter has run. The value is saved,
when the frequency converter is turned
o.
15-01 Running Hours
Range: Function:
0 h* [0 -
0x7f. h]
View how many hours the frequency
converter has run. Reset the counter in
parameter 15-07 Reset Running Hours
Counter. The value is saved, when the
frequency converter is turned o.
15-02 kWh Counter
Range: Function:
0 kWh* [0 -
2147483647
kWh]
Registers the power consumption of
the motor as an average value over 1
hour. Reset the counter in
parameter 15-06 Reset kWh Counter.
15-03 Power Up's
Range: Function:
0* [0 - 2147483647 ] View the number of times the frequency
converter has been powered up.
15-04 Over Temp's
Range: Function:
0* [0 - 65535 ] View the number of frequency converter
temperature faults.
15-05 Over Volt's
Range: Function:
0* [0 - 65535 ] View the number of frequency converter
overvoltages.
15-06 Reset kWh Counter
Option: Function:
[0] * Do not reset No reset of the kWh counter is required.
[1] Reset counter Press [OK] to reset the kWh counter to 0
(see parameter 15-02 kWh Counter).
15-07 Reset Running Hours Counter
Option: Function:
[0] * Do not reset
[1] Reset counter Press [OK] to reset the running hours
counter to 0 (see parameter 15-01 Running
Hours).
15-30 Alarm Log: Error Code
Range: Function:
0* [0 - 255 ] View the error code and look up its meaning in
chapter 6 Troubleshooting.
15-31 InternalFaultReason
Range: Function:
0* [-32767 -
32767 ]
View an extra description of the error. This
parameter is mostly used in combination
with alarm 38, Internal Fault.
15-40 FC Type
Range: Function:
0* [0 - 0 ] View the frequency converter type. The readout is
identical to the power eld of the type code
denition, characters 1–6.
15-41 Power Section
Range: Function:
0* [0 - 20 ] View the FC type. The readout is identical to the
power eld of the type code denition, characters
7–10.
15-42 Voltage
Range: Function:
0* [0 - 20 ] View the FC type. The readout is identical to the
power eld type of the type code denition,
characters 11–12.
15-43 Software Version
Range: Function:
0* [0 - 5 ] View the combined SW version (or package
version) consisting of power SW and control SW.
15-44 Ordered Typecode String
Range: Function:
0* [0 - 40 ] View the type code string used for reordering the
frequency converter in its original conguration.
15-45 Actual Typecode String
Range: Function:
0* [0 - 40 ] View the actual type code.
15-46 Drive Ordering No
Range: Function:
0* [0 - 0 ] View the 8-digit ordering number used for
reordering the frequency converter in its original
conguration.
15-48 LCP Id No
Range: Function:
0* [0 - 20 ] View the LCP ID number.
Parameter Descriptions Programming Guide
MG07C102 Danfoss A/S © 12/2015 All rights reserved. 97
4 4

Danfoss VLT Midi Drive FC 280 Specifications

General

Brand	Danfoss
Model	VLT Midi Drive FC 280
Category	DC Drives
Language	English