Data Aire MINI DATA ALARM PROCESSOR II User Manual

Describes the enclosure, power protection, and signal isolation features ensuring safe and reliable operation.

Covers the physical mounting and electrical connection procedures for the MINI-DAP II panel and its components.

Guides the user through accessing and modifying various system parameters, setpoints, and configurations via the menu system.

Details setting and managing the first level of password protection for system access and programming.

Explains how to set and adjust the desired room temperature for cooling and heating operations.

Guides users on setting and modifying the desired room humidity levels for humidification and dehumidification.

Details setting and managing the second level of password protection for enhanced system security.

Adjusts the cooling setpoint upward during unoccupied periods for energy savings.

Adjusts the heating setpoint downward during unoccupied periods for energy savings.

Adjusts the dehumidification setpoint upward during unoccupied periods.

Adjusts the humidification setpoint downward during unoccupied periods.

Defines the upper limit for temperature that triggers a high-temperature alarm.

Defines the lower limit for temperature that triggers a low-temperature alarm.

Defines the upper limit for humidity that triggers a high-humidity alarm.

Details the operational logic for Evaporator Fan, Cooling, Heating, Humidification, and Dehumidification in occupied mode.

Explains the operational logic for Cooling, Heating, Humidification, and Dehumidification in unoccupied periods of setback/up schedules.

Indicates when return air temperature exceeds the high temperature limit setting.

Indicates when return air temperature falls below the low temperature limit setting.

Indicates when return air humidity exceeds the high humidity limit setting.

Indicates when return air humidity falls below the low humidity limit setting.

Terminates all functions immediately when return air temperature exceeds the firestat limit.

Indicates a fault or failure in the temperature sensor, potentially affecting other alarms.

Indicates a fault or failure in the humidity sensor, locking out humidification/dehumidification.

Signals a high-pressure condition in the first compressor, shutting it down.

Signals a high-pressure condition in the second compressor, shutting it down (for dual systems).

Optional alarm activated by a smoke detector, shutting down all unit functions.