Chapter 3: Installation 37
Login and Configuration
Active-Directory Realm
Enter the name of the Active-Directory Realm for this
system [ ]:
Do you want to add a backup user? (yes|no) [no]:
Backup user
Enter backup user name:
Domain Controllers
Enter list of domain controllers for this system [ ]:
Enter the WINS server for the restorer to use:
WINS Server
Enter the IP address for the WINS server for this system
[]:
Enter one or more backup servers as restorer clients. An asterisk (*) is allowed as a wild
card only when used alone to mean “all.”
Backup Server List
Enter the Backup Server list (CIFS clients of /backup)
[]:
b. A listing of your choices appears. You can accept the settings (Save), reject the settings
and leave the setup process (Abort), or return to the beginning of the current section and
change settings (Retry). A Retry shows your previous choice for each prompt. Press
Return to accept the displayed value or enter a new value.
The following example is with an authentication mode of Active-Directory.
Pending CIFS Settings
--------------------- -----------------
Auth Method Active-Directory
Domain domain1
Realm domain1.local
Backup User dsmith
Domain Controllers
WINS Server 192.168.1.10
Backup Server List *
--------------------- ------------------
Do you want to save these settings (Save|Abort|Retry):
To Next Page
Loading...